The WET-2 soil moisture temperature conductivity rapid measuring instrument is widely used in horticulture and soil research. The FDR principle can be used to quickly measure the three important parameters of soil moisture, temperature, and conductivity. Its uniqueness lies in the fact that WET-2 can measure the electrical conductivity (ECP) of pore water in soil while measuring soil moisture and temperature.
技术规格:
WET-2传感器 | |
介电常数(ε′)测量范围 | 1~80 |
介电常数(ε′)测量精度 | ±2.5 |
介电常数(ε′)分辨率 | 0.1 |
体积电导率(ECb)测量范围 | 0~300 mS/m |
体积电导率(ECb)测量精度 | ±10 mS/m |
体积电导率(ECb)分辨率 | 1.0 mS/m |
温度测量范围 | -5~+50 ℃ |
温度测量精度 | ±1.5 ℃ |
温度分辨率 | 0.1 ℃ |
温度测量平衡时间 | 约20秒 |
体积含水量(θ)量程 | 0~100% |
体积含水量(θ)精度 | ±3% |
孔隙水电导率(ECP)量程 | 0~1600 mS/m |
孔隙水电导率(ECP)精度 | 典型±10%,最大误差读数的±20%或±20 mS/m |
频率 | 20MHz |
标定 | 对每个传感器的进行单独标定 |
防护等级 | 探头防护等级IP67,25针D型接头防护等级IP65,9针D型接头防护等级IP44 |
工作温度 | 0~+40℃ |
供电 | 测量的时候耗电典型40mA持续2.5秒,传感器供电5~9VDC |
尺寸 | 探头:长68毫米×直径3毫米(中间针长度为60毫米),外壳:55 × 45 × 12毫米 |
测量体积 | 500毫升 |
重量 | 75克 |
HH2手持读数表 | |
土壤水分范围 | 0~饱和,0~1500mV |
测量精度 | ±(电压读数0.13%+1.0mV) |
分辨率 | 1 mV |
内存 | 至多5000个读数(PR2/6:166~782个读数;SM200、ML2x、EQ2:227~2186个读数;WET:204~1272个读数) |
电池 | 9V碱性电池 |
电量 | 典型6500次测量(SM200或ML2x),典型4500次测量(PR2或EQ2), |
防护等级 | IP52 |
温度范围 | 0~40℃ |
跌落高度 | 约为1米 |
EMC | 通过欧洲EMC认证 |
尺寸 | 150 × 80 × 40毫米 |
重量 | 450克 |
显示屏 | 16 × 2行液晶显示屏 |
按键 | 7个按键 |
连接 | 1个25针D型连接口,用于连接传感器和通过RS232转换口连接电脑 |
软件 | 随机配套HH2Read软件 |
Technical enquiries can be made at my email in the first instance or you can call the MAI Vision at the following number:
Copyright © 2024 MAI Vision Ltd. All Rights Reserved. Website Map